FT Injector 125 lb/h GEN 3 - EV1 Connector

The FT Injector 125 lb/hr is a high-impedance fuel injector from the FT Injector family, so no peak-and-hold driver is required. It runs on every fuel — gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE — and uses EV1 connectors with silver-plated terminals for conductivity, with corrosion-resistant internals.

Generation 3 upgrades

• New optimized internal coil
• Next-generation spray pattern
• New needle geometry
• Internal filter/screen eliminated
• Shorter dead time — faster, more precise response
• Improved idle control precision
• Refined operation at low rpm
• Greater stability across the whole operating range

Features

• REAL flow — every injector is tested and calibrated for linearity, repeatability and accuracy across all cylinders
• Corrosion-resistant internals, backed by salinization testing on all raw material used
• Compatible with any fuel and with any ECU on the market
• FuelTech warranty and support

Technical

• High impedance, coil resistance 5.7–6.3 ohms
• Ingress protection IP67 / NEMA6
• Overall height 72.5 mm (2.85"), overall width 18 mm (0.71")
• O-ring diameter 14.6 mm (0.57"), tip 4.1 mm (0.16"), overall diameter 5.9 mm (0.23")
• In the box: 1 FT Injector, 1 manual. 90-day warranty.

Product Video

More FuelTech tech videos →