FT550 EFI System — w/ 6 cylinder A & B complete harnesses

This kit contains 3 parts, supplied together:

• FT550 EFI System — part number 3010005496
• FT450/FT550 6 Cylinder Universal A Harness — part number 2002007385
• FT550 6 Cylinder Expansion B Harness — part number 2002008377

FT550 EFI System — 3010005496

FuelTech's FT550 is more than an ECU offering electronic fuel injection, integrated dashboard, data acquisition, and power management. The FT550 is designed for engines with up to 12 cylinders, or up to 4 rotors, and features 14 programmable inputs and 24 outputs. In addition to offering all of the features and functions of the FT450, including touchscreen display, 4 programmable display screens, customizable splash screen, sequential injection and ignition, O2 closed loop, active traction control, integrated boost controller, internal datalogger, progressive and PRO-Nitrous controls, odometers, drag racing features, the FT550 is loaded with additional features such as electronic throttle control, inclinometer gauge, integrated GearController with strain gauge sensor on the shifter for more efficient gear shift cuts, built-in accelerometer (G-meter), and gyroscope. The FT550 is housed in a high-quality ABS case and is IP67 rated for marine and off-road applications.

• FT550 Manual
  FTManager Software
  FT550 CAD

FT450/FT550 6 Cylinder Universal A Harness — 2002007385

The FuelTech FT450/FT550 6 Cylinder Universal A Harness was developed to be installed on 6 cylinder engines. This harness has all the components needed to make a plug and play installation on an engine with a standard setup. The insulation and connectors are moisture, heat and oil resistant.

• FT450/FT550 6 cylinder universal harness Manual

OVERVIEW

The FuelTech FT450/FT550 6 Cylinder Universal A Harness is a plug and play wiring solution to be used with a FuelTech FT450/FT550 ECU. It has all the connectors, relays and fuses directly built-in and can be used with nearly any application with 6 injectors and 6 coils.

SPECIFICATIONS

• 6 injector outputs
• FuelTech Peak and Hold external driver ready
• FuelTech WB-Nano O2 ready
• GM Style intake air temperature sensor ready
• GM Style engine temperature sensor ready
• Pressure sensor ready for fuel, oil / another 0-5V sensor
• Extra output connector for generic use
• Crank and Cam connectors (hall and VR options included)

TECHNICAL SPECIFICATIONS

• 2x Peak & Hold Jumper Harnesses INCLUDED
• 6 EV1 injectors ready.
• 6 Smart coils ready.
• 2 FuelTech Peak and Hold external drivers ready (jumper included)
• 1 FuelTech WB-Nano O2 ready GM style intake air temperature sensor ready (IAT) GM style engine temperature sensor ready (coolant temperature).
• 2 pressure sensors ready for fuel, oil / another 0-5V sensor extra output connector for generic use.
• Crank and CAM connectors (hall and VR options included).
• This harness was designed for systems with up to 6 injectors, 6 smart coils and a FuelTech Wideband Nano O2 with Bosch LSU 4.2 sensor.
• Set up to run semi-sequential or multipoint injection and wasted spark.
• It is already wired for FuelTech Peak and Hold drivers when using 6 low impedance injectors.
• When using high impedance injectors, a Peak and Hold driver is not needed and in this case, only a bypass connector is required (jumper included).
• There are 3 separate relays to power the whole system, separating the injectors and coils from the electronics.
• To activate coils and injectors relays the Blue#6 output must be configured as Fuel pump or RPM activation.

Contents of packaging:

• Harness
• User Manual
• Mating Kit for "EXTRA" connector

Warranty: Worldwide: 1 Year

*This is only the A harness which is all the FT450 requires. If you are using an FT550 and want to use all of the extra inputs & outputs, you will need to purchase the B expansion harness as well (coming soon).

FT550 6 Cylinder Expansion B Harness — 2002008377

The FuelTech FT450/FT550 6 Cylinder Universal A and B Harness were designed to be a universal fit for 6 cylinder engines. The A harness has all the components needed to make a easy installation on a 6 in line or V6 engine. With a few modifications this harness can fit many applications, saving time at the wiring process. The insulation and connectors are moisture, heat and oil resistant.

• FT450/FT550 6 cylinder universal harness Manual

Technical Specifications:

• 6 EV1 injector connectors (12 when using FT550 and expansion B Harness)
• FuelTech Peak and Hold external driver ready (both A and B Harnesses
• FuelTech WB-O2 NANO ready (one)
• Intake air temperature sensor ready (GM style connector)
• Engine Temperature (coolant) sensor ready
• Fuel and oil pressure sensor ready
• Extra output connector for custom use
• Crank and Cam (Hall and VR) loose wires

Contents of Packaging:

• Harness
• Manual

Warranty: Worldwide 1 year

Product Video

More FuelTech tech videos →