GPA Series Fuel Pump Assembly - 255 LPH

255 LPH Electric Fuel Pump Assembly for Sniper EFI Fuel Tanks. Oven brazed fittings can withstand 100 psi. Genuine Walbro Fuel Pump included.

Features & Benefits
Heavy 10 gauge no-warp mounting plate

Fits: Replacement 255 LPH FUEL PUMP AND HANGER ASSEMBLY

Installation note: For a better seal use Permatex Indian_x000D_ Head Gasket Shellac Compound or_x000D_ Aviation Form-A-Gasket sealant on the_x000D_ gasket and screws._x000D_ _x000D_ Connect your in-tank wire harness to the fuel pump, making sure that the connections are secure. Route the wires through the pass through fitting being sure to leave a little slack to prevent strain or chaffing, Use a 9mm wrench to tighten the upper jam nut on the wire pass through in 1/4 turn increments until the wire no longer moves up and down. BE CAREFULL NOT TO OVERTIGHTEN DOING SO COULD BREAK THE FITTING OR CAUSE A LEAK.

In the box: Gasket Or Seal, Strainer

Specifications

Product Video