Gen III HEMI Drive-By-Wire Harness - Early Pedal

Similar to the changes with the cam and crank sensors, the Drive-By-Wire throttle pedal connector was changed in 2008 on cars while the trucks changed in the 2007 models. Interestingly, the throttle body connector is consistent on all engines. The early pedals use a larger connector. View the image gallery to see both types.

Features & Benefits
Capable of tuning with power adders such as nitrous, superchargers or turbos and compatible with methanol and water injection

Fits: Gen III HEMI Drive-By-Wire Harness - Early Harness with the larger TYCO/AMP connector ('03-'07 cars, '03-'06 trucks) Dominator Only. Only the 0459 1847 factory DBW throttle body has been calibrated and approved for use with this harness.

Installation note: The HEMI's Variable Valve Timing is not supported by the Holley EFI systems at this time. You can run an engine that is equipped with VVT, but the cam timing will revert to the mechanical default. The Holley R&D team is working on an accessory harness that will drive the VVT actuator. However, it is not available at this time. The HEMI's Multi-Displacement System (MDS) was primarily designed for fuel economy purposes and does not need to be connected when switching to a Holley EFI system. NOTE: Not legal for sale or use on pollution controlled vehicles.

Specifications

Product Video