NanoPRO — w/ 6.5ft Bosch LSU 4.2 unterminated harness / add Bosch LSU 4.2 O2 sensor

This kit contains 3 parts, supplied together:

• NanoPRO — part number 3010009597
• Nano & NanoPRO LSU4.2 Harness — part number 2001003625
• Bosch LSU4.2 WB-O2 Sensor — part number 3022000965

NanoPRO — 3010009597

The 3-in-1 NanoPRO is a Wideband O2 Sensor Controller, Dash Display, and Switch Panel in one!
Wideband O2 Senser Controller: The NanoPRO is compatible with 5 different wideband O2 sensors (Bosch 4.2, Bosch 4.9, Bosch 5.2, NTK ZFAS, and NTK Wideband O2 Sensor. The NanoPRO keeps your O2 sensor at the optimal temperature for accurate readings with 3 configurable heating modes; normal, fast, and current limited, in addition to auto startup. Additionally, the NanoPRO has an extended wideband reading scale with advanced hardware for fast and precise readings (reading range can reach values slightly lower than 0.21 λ).
Dash Display: With a 2” color touchscreen, the secondary display gauge function allows you to display information such as oil pressure, fuel pressure, boost, RPM, engine temperature, and more with the ability to configure up to 5 custom screens.
Switch Panel: The touchscreen display offers switch panel style button capability via CAN bus connection to your FuelTech ECU, providing more functionality without using an analog input.
The NanoPRO is IP67 rated (when properly connected to the harness), making it perfect for marine, off-road, and automotive applications.

See harness & sensor options options below. Harness and sensors not included with NanoPRO.

● BOSCH LSU 4.2 (sensor, harness)
● BOSCH LSU 4.9 (harness)
● BOSCH LSU 5.2
● NTK ZFAS (sensor, harness & adapter)
● NTK Wideband O2 Sensor

Nano & NanoPRO LSU4.2 Harness — 2001003625

Compatible with:

New WB-O2 Nano
WB-O2 Nano (V1)
NanoPRO

For use with the Bosch LSU4.2 O2 sensor.

Length:
2m (6.5ft) - Recommended size for most applications.
1m (3ft)
4.5m (15ft)

Bosch LSU4.2 WB-O2 Sensor — 3022000965

The Bosch LSU 4.2 Wideband O2 Sensor supports closed loop O2 maintaining optimal fuel delivery by delivering accurate measurements of the engine's air-fuel ratio to the ECU in real-time, determining the lambda value.

Fuel Compatibility:
The Bosch LSU 4.2 WB-O2 sensor is compatible with unleaded gasoline, ethanol gasoline blends, methanol, and diesel. However, the sensor's lifespan is significantly reduced when used with leaded fuel, diesel, or in 2-stroke engines.

Thread Size:
The Bosch LSU 4.2 sensor has a thread size of M18 x 1.51.

Part Number: 0 258 007 057 (VW Number: 021-906-262-B)2.

Additional Information:
Remember to handle wideband O2 sensors with care and never remove the O2 sensor connector during operation. If you have any specific applications or questions, contact our Tech Support or Sales department.

Installation and Calibration:
To operate the sensor effectively, it must be paired with a wideband O2 signal conditioner (also referred to as a wideband O2 controller). When paired with a FuelTech wideband O2 sensor controller, the sensor is automatically calibrated.

Compatible Wideband O2 Sensor Controllers:

• NanoPRO
• WB-O2 Nano
• Wideband O2 Weld Bung
• Bosch 4.2 WB-O2 Sensor Plug Kit