Holley Black 351W Ford Hi-Ram EFI Manifold Base 300-244BK
Intake Manifold Base
Black Ford 351W (9.5" Deck) Ford Hi-Ram Intake Manifold Base
- The 351W manifold is available to work with 95MM or 105MM GM LS throttle bodies
- EFI fuel rails are machined for -8AN o-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits.
- Plenum Top Gasket Type €“ 3/32€ Round O-ring Cord
- Manifold is designed for a 9.5" deck height.
- Requires the Use of Holley EFI Dual Sync Distributor - 565-111
- Black finish
*** The front and rear height measurements listed in the Specs section are referencing the overall height with the top plate installed. Please see the diagrams in the product images for other dimensions. Warning: Many Ford vehicle models were originally equipped with a heater core flow restrictor located at either the original heater hose fitting in the factory intake or inline in the inlet heater hose which protects the heater core from damage. If you are replacing the hoses between the engine and heater core or changing the factory fitting check to see if your application requires a flow restrictor. Failure to use the proper flow restrictor will likely result in a damaged or leaking heater core.
- Holley EFI
- Item Requires Shipping
- W14.7500” x H10.0000” x L20.7500”
Total Reviews (0)
You must login to post a review.
Write the First Review!