Holley Hi-Ram Intake - Black 300-116BK
EFI Hi-Ram Intake for 1 x 92mm GM LS3/L92 Throttle Body - Longitudinal Mount Plenum Top - Black Ceramic Coating
- Base Plenum Top Mounting Flange Height €“ 8.42€ to the lifter valley cover flange on engine block.
- Total Height with 92/102mm EFI Plenum Top €“ 12.32€ to the lifter valley cover flange on engine block.
- Port Size €“ 2.49€ Height x 1.21€ Wide
- Mounting Flange Gasket Type €“ Standard LS3 Molded O-Ring
- Plenum Top Gasket Type €“ 3/32€ Round O-ring Cord
- Throttle Body Flange Location, with 92/102mm EFI Plenum Top : Height €“ 8.42€ (from engine block lifter valley cover flange), Longitudinal Location €“ 3.84€ (forward from engine block front flange), Angle €“ 25 deg. (down from vertical)
- Runner Length €“ 6.50€, As-Cast Runner Cross-Sectional Area €“ Tapered 4.25 in² to 2.77 in²
- Intended for use on naturally aspirated or forced induction engines in the 6.0 to 7.0+ liter range, max power at 7000-8000+RPM
*** The front and rear height measurements listed in the Specs section are referencing the overall height with the top plate installed. Please see the diagrams in the product images for other dimensions.
- Item Requires Shipping
- W14.5000” x H16.2500” x L24.0000”
Total Reviews (0)
Write the First Review!
You must login to post a review.