Terminator X Max 24x /1x Multec 2 LS MPFI Kit with DBW Throttle Body and Transmission Control 550-927
Terminator X Max LS EFI
GM LS 24x Crank, 1x Cam - 4.8/5.3/6.0 Truck Engines - Multec 2 Injectors - and Drive-By-Wire Throttle Body and Transmission Control, No Laptop Required, 3.5" Touchscreen Included
- For GM LS 4.8/5.3/6.0 Truck Engines with 24x crank reluctor, Transmission Control, Drive-by Wire throttle body control, and Multec 2 Injectors
- Real-Time fuel map learn, takes the guess work out of tuning your base fuel table.
- High Impedance Injector Drivers will safely power most Stock LS injectors, and Holley EFI Injectors. Injector support chart provided in the instructions (Will not control Low Impedance Injectors)
- All of the new Terminator X Max systems utilize the Bosch LSU 4.9 wideband to relay AFR information to the ECU for accurate reading and precise tuning control.
- On-Board 1bar MAP sensor, is perfect for N/A or Nitrous engine combos. If your combination requires a 2+Bar, we recommend GM 12592525, and our adapter part number 558-416.
- MAP Sensor vacuum hose adapters (1/8th €“ ¼ and 3/16ths)
- 4 Inputs €“ 12v, Ground, 5v, and Frequency, for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake
- 4 Outputs €“ Ground, PWM - , for accessories such as
- fans, boost control, nitrous control, IAC Kit, and More
- Boost Control €“ Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties-Board Diagnostic LEDS for: ECU Power €“ Engine Run €“ Wideband Status €“ TPS Calibration €“ Crank Signal €“Cam Signal. Allow you to identify any Critical engine issues a
- Nitrous Control €“ Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFRadjustable through included 3.5€ full color touchscreen, base tune easily created via handheld Wizard!
- Advanced Tables €“ 4x 1D Tables, 1x 1D per Gear Table, 4x 2D Tables, 1x 2D per Gear Table, can be used for any custom tables you can dream up, such as Flex Fuel Sensor Offset Table, or a custom fuel or oil pressure safety!
- On-Board Diagnostic LEDS for: ECU Power €“ Engine Run €“ Wideband Status €“ TPS Calibration €“ Crank Signal €“Cam Signal. Allow you to identify any Critical engine issues at a glance
- The included 3.5" Touchscreen Handheld contains a calibration wizard, that allows you to quickly build a base tune for any LS engine. Additionally the handheld provides internal data-logging and a fully customizable gauge display.
- The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDS must face up!
- Plug and play compatible with more Holley EFI accessories such as
- analog style gauges, shift lights, various modules, and coming soon, 12.3" digital dash support!
- Free EFI Tuning Software for complete control of your Terminator X power plant
- Recommended Pedal part number - 10379038
- Includes: 24x LS Engine Main Harness - Multec 2 Injector Harness - DBW Throttle Body Harness - 4L60E/4L80E Transmission Control Harness - Terminator X MAX ECU - ECU Main Power Harness - Bosch LSU 4.9 Wideband Oxygen Sensor - Input/Output Harness - and ass
Terminator X ECU's are designed to be mounted with the LED's facing up. Designed to work with GM Throttle body P/N's - 12570800 Designed to work with GM Throttle Pedal P/N - 10379038 Not compatible with Holley EFI V5 Software or Firmware. Loading Holley EFI V5 firmware into a Terminator X ECU may result in permanent damage.
- Item Requires Shipping
- W11.0000” x H8.0000” x L12.2500”
Total Reviews (0)
Write the First Review!
You must login to post a review.